Print Article
BookMark Article
10 newest articles RSS
How To Replace The Right Car Exhaust
Author : andyauto auto
Submitted : 2011-12-27 22:59:04 Word Count : 576 Popularity: 0
Tags: Flowmaster Exhausts, Flowmaster Mufflers, Car Parts
As the drain or exhaust combustion gases also have an influence on engine power. Because of that, this car component has an important meaning.
In fact, so the importance of not a few car owners who tried to replace it with the creation exhaust muffler repair shop or manufacturer. Only, not a few who feel disappointed. Because after the exhaust replaced the car instead of lessening power is precisely the opposite, becomes sluggish.
he, a good exhaust design will provide the proper back pressure. As a result, the combustion process in the engine combustion chamber will have a continuous air intake in the optimal amount.
The result, power output and more perfect.
Only, not infrequently exhaust design also resulted in wasteful car fuel.
So what should be considered before replacing the muffler for big power but not wasteful of fuel? Here the tips:
1. Choose the ideal size
Exhaust pipe size options commonly available in the market is 3 inches, 3.5 inches, and 4inci. We recommend that you consult with an expert exhaust with comparative advantages and disadvantages ask when using the size of each option.
Because the diameter of the pipe is very influential on the exhaust gas is pushed. Therefore, choosing the size of the pipe is very difficult to match, the calculation of the combination between the location of the engine, intake manifold, carburetor or place of entry of the fuel must be carefully calculated.
Do not forget to customize the header, resonator, and muffler with the pipe size. Wherever possible choose a good pipe with grooves and rounded to the rest of the exhaust gas can flow smoothly.
2. Make sure the configuration of the header and pipe design
The header is the exhaust gases of combustion from the engine block. In the four-cylinder engine vehicles amounted to four headers and six six-cylinder engine.
Configuration header is generally 4-2-1 or 4-1. This means that exhaust gases from the engine block is channeled into four channels, then the two channels, and empties into a channel.
While the 4-1, it means that the combustion gases channeled into four channels and empties directly into one channel.
If you want to replace the exhaust muffler factory default with other manufacturers products. Make sure, configuration and design of pipe holes and grooves just right.
So in addition to not cause wasteful fuel cars, also boost energy.
The reason is, the more smoothly the gases of combustion is wasted energy will be even greater. And vice-versa. When proper power is increased by 50-10 per cent of the initial energy.
3. Customize your car with this type of transmission
When you use a manual transmission car then carefully consider the start of the header, resonator, to the muffler. Make sure the size, connections, and component design it right.
Therefore, the manual transmission car, everytimes change gear position and stepped on the gas pedal at the same time jets of gas from the engine block increase. The gas stream that require proper management in order to give effect to the back pressure into the combustion chamber precisely at a time is wasted on a regular basis.
Meanwhile, if your car is automatic transmission, the requirement is quite simple. Simply replace the header configured 4-2-1 with proper design plus the pipe diameter is not too large.
Because, if the diameter of the pipe is too large as well as free flow exhaust. For automatic transmission cars, the Flowmaster Exhausts, Flowmaster Mufflers of this type would make more extravagant
Author's Resource Box
To learn more Flowmaster Exhausts, Flowmaster Mufflers visit here Car Parts.
Article Source:
Article Directory